1
/
of
1
WORKCORE SUPPLIES
Rotary Hammer 800W 2.8J SDS-Plus 4-Function 5500IPM 220V
Rotary Hammer 800W 2.8J SDS-Plus 4-Function 5500IPM 220V
Regular price
R 1,883.00 ZAR
Regular price
R 2,070.00 ZAR
Sale price
R 1,883.00 ZAR
Taxes included.
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
⚠️ Note: Products from different suppliers may have separate delivery charges. Fees are calculated at checkout.
Specifications
| Description | Specification |
|---|---|
| Power | 800W |
| Voltage | 220–230V |
| Impact Energy | 2.8J |
| Chuck Type | SDS-Plus |
| Functions | 4 (Drill, Hammer Drill, Chisel, Chisel Lock) |
| Impact Rate | 5,500 IPM |
| No-load Speed | 0–1,200 RPM |
Application
- Drilling into various masonry materials using various masonry drill bits
- Chiselling various masonry materials using various chiselling points
Features
- 4-function mode selector: Drill, Hammer Drill, Chisel, and Chisel Lock
- SDS-Plus chuck for quick and secure bit changes
- Variable speed trigger for precise control
- Forward/reverse rotation selector
- 800W motor for demanding masonry applications
- 2.8J impact energy for efficient material removal
How to Use
Installing Chisel & Drill Bits
Pull back the fastening sleeve and hold. Push and rotate the SDS accessory into the tool holder as far as it will go. The tool will lock automatically. Check that it has locked by pulling the tool. To remove, pull back the fastening sleeve and remove the accessory.
Depth Guide
Insert the required drill bit. Fit the depth stop into the hole of the auxiliary handle and set the required depth.
Rotation Setting
- Forward (R-BOTTOM): Push the lever down on the top side of the handle.
- Reverse (L-TOP): Release the on/off switch and push the lever up on the top side of the handle.
Fitting the Auxiliary Handle
Loosen the auxiliary handle by unscrewing it. Slide the auxiliary handle clamp over the collar behind the bit holder. Rotate the side handle to the desired position and tighten the handle.
Share
